VARICONN 5-in-1 POE detector, Power meter, Resistance, Continuity, and Port Mapping RJ45 Network Cable Tester
VARICONN 5-in-1 POE detector, Power meter, Resistance, Continuity, and Port Mapping RJ45 Network Cable Tester
Embedded Files
$89.99 USD 69.99USD
Features :
The POE-1 is a POE cable tester and wire pair tester for CAT5e, CAT6, CAT6a, and CAT8 RJ45 connectorized cables. This device complies with CE,FCC, ROHS, REACH, ISO/IEC 11801, and EIA/TIA 658 standards.
Powered by one AA battery or powered by a PSE if it is connected to one. When powered by a battery, it has a 20 second auto-off to conserve battery life.
Does not consume battery power while connected to a PSE and is fully powered off when the ON/OFF Switch is in the OFF position. These features allow the device to be used for over 5,000 test cycles before the battery needs to be replaced.
ON/ OFF Switch
Function selection button, select between 3 test
a. POE Testing
b. Resistance/Continuity cable testing
c. Port mapping
Confirm and Start Testing button
LCD Display
Remote test adapter for cable testing
POE test port for connecting to PSE (Power Supply Equipment)
POE test port for connecting to PD (Powered Device)
Test port for cable testing, and Port mapping
POE Testing – Power Supply Detection
Using the POE-1 in the POE mode, you can detect POE using the followingstandards: 802.3af, 802.3at, 802.3bt (up to 100W), 48V Passive 2 Pair and 4 Pair, Mode A and Mode B. It also displays the polarity of the POE line.
POE Testing – Inline Power Monitoring
Using the POE-1 in the POE mode, you can also perform real-time testing to display the Voltage, Power, and Current of a line connected to a PSE (Power Sourcing Equipment) and PD (Powered Device).
LED Display Description
LED Display Description
GREEN DOT - The corresponding wire pair has good continuity, and the wiring is correct.
ORANGE DOT - The corresponding wire pair has Resistance that is too high.
RED DOT - The corresponding wire pair has a short or is miswired.
RED X - The corresponding wire pair has an open circuit.
You may also like
You may also like
Cable Testing – RJ45 Wire Pair Testing
Using the POE-1 in Test Mode, you will be able to test the integrity of an ethernet cable and accurately diagnose cable issues quickly.
Google Sites
Report abuse